The Light Kit

Previous Page | Class Topics | Next Page

The Light Kit

The PORTABLE LIGHT KIT consists of two LOWELL TOTA LIGHTS with STANDS, CORDS, LIGHT SCREENS, a GEL HOLDER, and an UMBRELLA.



Open the STAND LEG by loosening the screw, pulling the legs out, and re-tightening the screw. To lengthen the stand, loosen one screw at a time, pull out the segment, and re-tighten the screw. Attach the LAMP HEAD to the stand by putting the CONNECTOR on the LAMP over the top of the stand and tightening the screw. Plug the ADAPTOR of the ELECTRIC CORD into the LAMP HEAD and plug the other end into the wall.

Safety First . . .

1. Make sure to AIM the lamp head away from anyone when it is plugged in, just in case the lamp pops when you plug it in.
   
   
2. Never touch the lamp inside the head with your fingers. Doing so will cause the lamp to fail due to the glass getting etched by the OIL from your fingers and the high heat.
   
   
3. Be careful not to touch the bulb, screen, or other HOT SURFACES of the lamp while (or after) it is being used.
   
   
4. With the lamp turned “off”, carefully open the BARN DOORS.

Now it's time to light our subject...

NEXT:
Basic Lighting